Scanner recommendations?

[NessIllustration]

@Melissa-Bailey-0 Thank you SO much, this is amazing!! I think I might get that one!

[NessIllustration]

@Melissa-Bailey-0 I found a local chain that sells it, but I've been looking at the product details and I can't find anywhere what's the size of the scanner flatbed :oAll the websites I've visiting mention the max printing size and say nothing of the scanner functions. Frustrating! What max size does it scan?

[Melissa_Bailey]

@NessIllustration you're so welcome!

The scan bed is 12 x 17 inches. It might do a smidge over 17" wide, but I wouldn't risk it for a single scan (stitching together is always an option for a really big piece). The illo I scanned was 9.5" x 17" and it just fit on the longest side.

The WF-7820 is on the large side. It sits on my Alex rolling drawer unit from Ikea and it fits perfectly, with some room to spare all the way around.

You can find specs here.

Hope this helps! ️

[NessIllustration]

@Melissa-Bailey-0 You're an angel!!

[Melissa_Bailey]

@NessIllustration

[NessIllustration]

@Melissa-Bailey-0 Is that the drawer unit? https://www.ikea.com/ca/en/p/alex-drawer-unit-on-casters-gray-turquoise-black-s39422198/
I may get that too haha

[Melissa_Bailey]

@NessIllustration it's this one and I love it! Waited over 6 months for it to come back in stock and so happy with it.

Just revamped my studio to add some much-needed storage and also got the one that you linked to, just without the casters. I don't think the WF-7820 could fit on top, though.

Love the clean lines with the Alex storage units and put them together myself -- only took a couple of hours!

[NessIllustration]

@Melissa-Bailey-0 Thanks for the suggestions! My studio could use some updates and since the Spring's been busy I have some extra money to play with

[Melissa_Bailey]

@NessIllustration and they're affordable!

If it helps, here's how they're set up:

[NessIllustration]

@Melissa-Bailey-0 That's lovely!! so much storage!
Oh Melissa I just thought of something: do all ink cartridges need to be inserted and functioning for the scanner to work? Last time I had an all-in-one, if even one color was out the whole machine would refuse to work including the scanning, it was a huge pain!

[Melissa_Bailey]

@NessIllustration you know, I'm not sure. I always keep them filled. And I know from experience that you need to buy Epson ink. The printer will not work if you put off-brand or no brand ink cartridges in the unit. So far, I've bought my ink directly from the Epson site as that's been the most affordable. Since it's a business printer, I chalk it up to being a business expense.

[NessIllustration]

@Melissa-Bailey-0 I'm not surprised only Epson inks would work, since the printer is much cheaper than it should be, so it makes sense that they're actually making the money on ink!

[APHOTICMOTH]

@NessIllustration @Melissa-Bailey-0 Usually there is a bypass, do a search. They are trying to strongarm you into buying ink. On my canon, I hold the stop button for 10 seconds, and it bypasses the alert, allowing me to scan and print again.. Also when they give that alert, you still have a lot of ink left, you can even pull out the cartridge and tilt it around to get the last bit sucked into the foam.

Also printer ink is a giant scam. I just had 30 cartridges delivered today, for my canon pixma MG 5320. They have the chips, great ink. $18 + free shipping for 30 cartridges I've been buying these for years. That's compared to one 5 cartridge set for around $100.

[NessIllustration]

@CLCanadyArts Yeah it really is strong-arming!! But in some cases it can be used to our advantage. I don't use the printer a lot (in fact I don't currently have a color printer at home). I just have a scanner, but buying the all-in-one printer with a great scanner in is cheaper than an equivalent scanner! Since I don't print a lot, I shouldn't have to replace the cartridges in a long time and this is much cheaper for me than buying just a scanner (I wish I'd realized this before!)

[APHOTICMOTH]

@NessIllustration I think every all in one has a bypass though. All-in-ones are nice, albeit heavy. I wouldn't give up mine. The only bummer is if one part breaks. My friend dropped my all in one recently, lifted up one side and it slipped out of his hand, now the scan bar gets stuck occasionally. I've had this canon for about 6 years or so,

Here is where I get my cartridges. https://www.ebay.com/itm/30-PK-PGI-225-CLI-226-Compatible-Ink-Cartridge-For-Canon-PIXMA-MX712-MX882-MX892/161569396460 That is the exact listing I got, obviously you would need to check which ones you need. I've bought from them for years, never had an issue. I had prints for years that never faded, but not sure what long term archival quality would be.

[NessIllustration]

@CLCanadyArts That's such useful info, thank you!!

[NessIllustration]

@Melissa-Bailey-0 I did it! I purchased and just finished installing my new Epson WF-7820 Thank you for the recommendation hun! WOW it is big! I was expecting it and still, was surprised!

[Melissa_Bailey]

@NessIllustration I had that same urge to crawl in the box, but resisted cuz I would've been joined by a hyperactive poodle!

Congratulations on your new "baby"! Hope that it print and scans bee-yoo-tifully for you. ️

[NessIllustration]

@Melissa-Bailey-0 It's the cat instinct