I got a little gig! Posting spooky project updates.

PenAndrew · 31 Mar 2022, 10:14

I really like the feeling you have created here, the colour schemes and the different perspectives that you have used. I look forward to seeing more of your work. Steve.

Valerie Light · 3 Apr 2022, 23:20

I'm having a meeting tomorrow to check in with my art director about the line drawings. Hopefully I'll be able to start rendering soon!
Here are the 4 chapter heading spreads (Magic, Gear, Physical Stress, and Running the Game) and one piece of incidental art (the Gibbering Mass of Orifices)

I'm loving this assignment, way more than I thought I would. Gonna have to figure out how to market for this type of work in the future.

PenAndrew · 4 Apr 2022, 11:52

@Valerie-Light Will these be card designs?

Valerie Light · 4 Apr 2022, 16:33

@PenAndrew No, they're 2-page spreads to open each chapter of an RPG rules book.

PenAndrew · 6 Apr 2022, 09:34

@Valerie-Light Sorry Valerie, I wasn't communicating very well, I meant I see these drawings as a kind of card set, like playing cards. They sparked this idea in my mind.

Kristen Lango · 8 Apr 2022, 03:29

@Valerie-Light These sketches are incredible! I cannot wait to see them rendered!

Valerie Light · 8 Apr 2022, 10:38

@Kristen-Lango Thank you so much! I just got the go ahead to start rendering, and also they've asked for another spread!

Jeremiahbrown · 8 Apr 2022, 12:22

@Valerie-Light I love your sketches!! Keep 'em comin'!

Valerie Light · 9 Apr 2022, 13:45

@Jeremiahbrown Thank you! Same to you!

Valerie Light · 13 Apr 2022, 13:01

I psyched myself out a little bit this week. After getting the clean line drawings finished and cleared with the art director, I realized a hiccup in my plan.

This project will be printed in only 7 colors, and I need to stick to the palette they provided. No blending, no multiply layers, no fiddling with opacity or the bright/dark sliders and curves. Yikes! I do those things all the time! For this, I can only stipple, crosshatch, and build textural layers of opaque color.
And! The team loved the scratchy, gouache-y, colored pencil scribbles from my color thumbnails. But, my Fat Pencil brush in Procreate doesn't scale up to the size of mark I'll need in the finished piece. oops.

So I kind of went back to the drawing board on exploring some new Procreate brushes from Bardot, looking for brushes that would scale up scratchy textural marks without getting blendy. So far I've done one test rendering, following Lee's advice of starting with the spread that you're most excited and confident about painting.

Looking at it this morning, I think I need to make the kids's silhouettes a bit more clear, and I think I've got a little too much texture, especially in the foreground. I'm going to leave this one alone for now and move on to another spread as I settle in to this new work method. I welcome feedback on it!

Asyas_illos · 13 Apr 2022, 14:44

@Valerie-Light only 7 colors?! That’s rough, I generally give my self around that many but l always use shades that are lighter and darker than those 7 too, so it ends up being like 26 colors lol. But I do agree there is too much texture going on it looks a bit grainy, and yah trying to make those silhouettes clear is really going to make this illustration pop is that the palette they gave you to work with or is it modified by you?

Asyas_illos · 13 Apr 2022, 14:51

@Valerie-Light I think that version on the bottom right looks good with the light background you can see the trees clearer too as well as those kids and their shadows

lizardillo · 13 Apr 2022, 14:56

@Valerie-Light when they say it's going to printed in 7 colours do they mean 7 spot colours? As in 7 separate spot colour plates on the press? Or just use the 7 colours in the art and its printed 4 colour process CMYK?

I don't think Procreate supports spot colour channels for printing but then again 7 spots does seem a bit excessive so I'm guessing they are not using 7 separate Pantone inks.

Valerie Light · 13 Apr 2022, 14:57

@Asyas_illos I do want to use and control that grainy feel, because I can't blend I can only use speckles or crosshatching for gradients. I've taken it too far right now.
They liked that bottom thumbnail but said it was too bright overall, and should be more in the world of the skull/seance thumbnail. But you're right, I do need some lighter values in the middle ground to make the characters silhouettes pop more.

Confusingly, this is the palette of pantone swatches they gave me. Clearly more than 7 colors, but

Valerie Light · 13 Apr 2022, 14:59

@lizardillo I don't know any of this at all, Liz. I'm just swatching from that palette and abstaining from transparent layering.

lizardillo · 13 Apr 2022, 16:37

@Valerie-Light Ok. I would ask if they need to be exported as separate Pantone spot print plates before you get too far. I would ask how they have printed in the past too just in case they have a way of doing it you can use as reference.

As far as I know Procreate will export to CMYK. So even if you use the spot colour refs in the file you will only have the four colours channels to make the print plates out of so no matter what colours you use it will only export to Cyan, Mag, Yellow and Black.

If it's 7 different Pantone print plates (which is a lot!) then thats quite a technical file to set up. If it's just use the colours and print as CMYK then that's fine.

The only way you would be able to get around this in Procreate, off the top of my head, is to use each colour on a separate layer and export that layer one at a time so they can make the separate spot colour plates. (Imagine it as if you were making separate screen printing screens.)

You would need to specify the order of your layers (which Pantone is the top layer, which is next etc.) make sure the colours are printed in the right order on the press (i.e the right colour is printed on top of the correct colour).

The best thing to do is let us know what they say.

Valerie Light · 14 Apr 2022, 15:13

@lizardillo woof, ok thank you for the thorough information. I'll bring this to my art director at our next check-in, but honestly I think we're way more low budget that all this, and I'm not certain their team is all on the same page.

Valerie Light · 14 Apr 2022, 15:15

Still testing rendering. What do you think of this one?
(there will be a chapter title in white over top of the right side, and text below)

lizardillo · 14 Apr 2022, 16:18

@Valerie-Light Yes I imagine printing in 7 spots would cost a small fortune! It was just the "printing in 7 colours" that triggered my studio artworker mode. I've worked at a printers and in print design for too many years so I automatically think in print specs

The latest image is good. I rely so heavily on layer modes and masks nowadays I don't think I could just use mark-making like you are here. Great work!

Valerie Light · 14 Apr 2022, 16:43

@lizardillo Thanks, Liz! I'm learning lessons about working outside my style, but I'm getting there. It's HARD, but I'm enjoying the challenge.
I'm digging the Goosebumps/ Hardy Boys adventure vibe, though.